|
|
3D
Soap Molds, CP Soap on a
Rope Help, MP Soap
on a Rope Help,
3D Standard Soap Help,
Mold Home Page
~ 3D SOAP MOLD INSTRUCTIONAL
GUIDE~
How to Make Melt
and Pour Soap on a Rope
How to Make M&P
Soap on a Rope
In this tutorial you will learn how easy and fun it is to make your
own professional M&P soap on a rope, using our two-part 3D soap molds
which are perfect for this process.
Soap on a Rope
fits conveniently around shower faucet or handles. Soap dries faster,
and lasts longer.
It's also a great product for anyone with mobility problems, as you
can hang the soap over your arm while you bathe or shower.
|
|
Supplies You Will Need
|
|
|
Measure Your Rope
Measure the length of rope necessary to embed the rope half-way
into the bar, to the top of the funnel.
|
|
|
Prepare Your Rope
Turn the rope around and tuck the remaining rope under the
rubber band.
|
|
|
Prepare Your 3D Soap Mold
Lower the heat sealed end of the rope into the mold cavity,
through the funnel.
Center the rope in the funnel (left to right), and be sure that
the rope is hanging straight into the mold cavity. |
|
|
Pour Your Soap
After preparing your soap base, pour the soap slowly and
steadily into the mold.
Overfill the mold cavity by pouring an excess into the funnel.
This will act as a reserve and eliminate any large air pockets
from forming at the top of the bar.
Lightly tap the mold onto the table to release any trapped air,
and if necessary, refill the funnel reserve |
|
